Skill Level

  • Beginner
  • Intermediate
  • Advanced

Board Type

  • Groveller
  • Everday
  • Performance

Wave Height (Feet)

  • 0
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

Wave Type

  • Reef
  • Beach
  • Point

Rail Type

  • Boxy
  • Medium
  • Low

Entry Rocker

  • Flat
  • Medium
  • Full

Exit Rocker

  • Flat
  • Medium
  • Full

Board Features

Glassing Specifications: Stock PU (4x4x4).

Bottom Contour: Single to Double Concave to Flat through tail exit.

Tail Shape: Rounded Square.

Fin Setup: Thruster. FCSII or Futures.

Sharpeye Inferno 72 Model Overview

Stab in the Dark - WINNER... The Inferno 72 is the model Sharpeye Surfboards built for the 2021 Stab in the Dark contest. This board is a PU/PE replica of the Dark Arts Epoxy board that took the win.

The Inferno 72 was originally designed for Filipe Toledo to compete on at "The Rumble at the Ranch" competition in 2020. Filipe ended up winning the comp. When Sharpeye shaper Marcio Zouvi was approached by Stab to enter the Dark Arts edition he chose to supply the Inferno 72.

The Inferno 72 is a tuned up version of the Disco Inferno, a tried and tested QS favourite. The board has added rocker in the entry and exit for more hold through turns and drive. The bottom contour features a medium single concave that runs into a deep double between the fins then eventual ending with a flat exit. This combination controls water flow, breaking it up through the back end to make the board more controlled and quick in turbulent water or flatter faced waves. It’s going to surf its best in small to medium sized waves and just like the Disco Inferno the Inferno 72 is a performance surfboard that will handle just about all conditions thrown at it and maintain its spark.

It’s recommended to order the Inferno 72 in the same size as your go-to shortboard. Drop one inch for a step down. Contact us for custom dimensions.

Recommended Fins

Futures: JJF Fins or F8 Fins
FCS: Accelerator Fin Family - Filipe Toledo Fins or Accelerator PC Fins

Stock Board Dimensions Guide

LENGTH WIDTH THICKNESS VOL (L)
5' 4” 18 1/4” 2 1/4” 22.10L
5' 5” 18 3/8" 2 5/16” 23.40L
5' 6” 18 1/2" 2 3/8” 24.20L
5' 7” 18 5/8” 2 3/8” 24.80L
5' 8” 18 3/4” 2 3/8” 25.30L
5' 8” 19” 2 7/16” 26.60L
5' 9” 18 3/4" 2 7/16” 26.40L
5' 9” 19 1/4” 2 1/2” 27.90L
5' 10” 19” 2 1/2” 28.00L
5’ 10" 19 1”/4 2 5/8" 28.80L
5’ 11” 19 1/4” 2 1/2” 28.80L
5’ 11" 19 1/2” 2 1/2" 29.20L
6' 0” 19 3/8” 2 5/8” 30.50L
6' 0” 19 3/4” 2 5/8” 31.50L
6' 1” 19 1/2” 2 5/8” 31.20L
6' 1” 20” 2 5/8" 32.00L
6' 2” 19 5/8” 2 5/8" 32.40L
6' 2” 20 1/4” 2 5/8” 33.40L
6' 3” 19 11/16” 2 5/8” 33.00L
6' 3” 20 1/2” 2 11/16” 34.50L
6' 4” 19 3/4” 2 11/16” 34.10L
6' 4” 20 5/8” 2 3/4” 36.30L

** Unfortunately not all available dimensions are held in store, if the sizing your after is not available contact us and we'll make you a fresh one.